Stone Fireplace Surrounds and Refacing in Federal Way

Typical cost in Federal Way

  • Surround around the firebox, about 25 to 40 sq ft$1,350 – $3,800+
  • Floor-to-ceiling fireplace wall, about 100 sq ft$2,400 – $5,900+

A dated brick fireplace can get a new stone face without touching the fire itself. At Federal Way Stone Veneer we work on the facing, including its shape, thickness, the hearth and the finished edges. Changes to the appliance, firebox or venting are separate work.

We work mainly in Federal Way and also in nearby Auburn, Des Moines, Kent and Milton. Include your address and we will confirm it is in our area.

Stone fireplace surround and return wall with an unlit black firebox, timber mantel and low hearth

Fireplace facing options

First pick how far the stone goes; then we fit the hearth and mantel you are keeping to the new, thicker face.

Living room with a floor-to-ceiling stacked stone wall around a gas fireplace and a television, with a timber mantel

Refacing an existing brick surround

We start by looking at the brick, any paint or coating on it and any loose spots. Whether stone can go over it depends on that condition and on how the stone is fixed. New stone also makes the surround deeper, so the hearth edge, mantel and trim beside it may no longer line up. We price those changes too, so you can see whether keeping the brick really makes the job simpler.

Full-height fireplace feature walls

Taking the stone up to the ceiling changes the fireplace’s proportions compared with a small surround. We detail the outside corners, how the stone ends at the ceiling and how wide it runs beside windows or cabinets. Deep textures throw strong shadows under downlights, so look at samples where the wall will be seen. If a TV, shelf or other fixture is going on it, we plan its support and service access apart from the stone.

Living room fireplace faced in pale gray stone with a wood mantel and a raised stone hearth

Hearth, mantel and corner detailing

We design the hearth, the mantel and the stone returns together. Corner pieces can make the facing look like solid stone instead of a flat skin with cut edges showing. Let us know whether your hearth stays as it is, gets a new finish or needs other work. New stone doesn’t change the clearances the fireplace needs; the maker’s instructions still apply, including to anything combustible behind or around it, like backing and trim.

Keep the facing and the fireplace separate

Natural thin stone and manufactured stone come in different textures and color ranges. We lay a tight ledgestone pattern next to one with visible mortar joints so you can compare, and we only use joints the stone maker approves. The joint color can change the look as much as the stone does. Send the fireplace model with your photos so we can check the facing against that fireplace’s instructions. Gas lines, vent changes, firebox repairs and chimney repairs are not part of our facing work. If you need them, have the right specialist do them before we close up the surround. Our written estimate lists tear-out, backing preparation, the facing, hearth or mantel changes and repairs to nearby finishes separately.

Get a quote for your stone fireplace surrounds and refacing project

If you know the fireplace model, include it with a straight-on photo, side views showing depth and the stone style you like. Say which parts of the hearth and mantel you want to keep.

Request a free quote

View contact details

Call (253) 785-6675

Get a quote for your project

Call (253) 785-6675